Temperature Conversion Application

Celsius/Fahrenheit scales

 

 

 

 

 

 

Test Requirements and

Product Overview

 

Table of Contents

 

Table of Contents. 2

1.    Introduction. 3

1.1     Revision History. 3

1.2     References. 3

2.    Tools and Test Equipment Required. 3

3.    Test Configuration. 3

3.1     Test Preparation. 3

4.    Test Procedures and Results. 4

1.    Introduction

The following test report is for Ref., Test Plan, TCA [R1].

1.1    Revision History

 

Version

Date

Author

Description of Changes

A

06/26/01

MKJ

Initial release

1.2    References

[R1]

Ref., Test Plan, TCA

35687

A

 

2.    Tools and Test Equipment Required

The TCA application will be available from a internet connected PC with a minimum of 128M RAM, 800Mhz P4 compatible computer with MS windows 2000 or above, 10G hard disk free space.

3.    Test Configuration

The TCA application will be tested as if it were in production.  Testing should be conducted in such a way as to assume the test environment is compatible with the production environment.

3.1    Test Preparation

The TCA software should be installed on the test platform and fully operational according to the Software Installation Plan.

 

Hard Copy Files Maintained by Central Documentation Center

 

4.     Test Procedures and Results

Test Setup

Expected Result

Actual Result

Pass

Fail

TCA:VTP:1 The web page will be accessed from an Internet Explorer Version 5.5 URL = “http://www.sesi-va.com/~jacksonmk/TCA/”
{Test Method = I}
 [TCA:PRD:1]

 

The page will display without incident.

Expected results were observed. 

{Test Pass = T}
{Test Date = 6/29/04}

TCA:VTP:2 The tester will enter 23 in the temperature value field and then press the TAB key. Then use the mouse pointer to select “Celsius” temperature scale and the press the TAB key.  The tester will then press the ENTER key.
{Test Method = I}
 [TCA:PRD:2] [TCA:PRD:4] [TCA:PRD:6] [TCA:PRD:8]

 

The system will convert the Celsius temperature value to Fahrenheit value 73.4 F in the result fields.

Expected results were observed. 

{Test Pass = T}
{Test Date = 6/29/04}

TCA:VTP:3 The tester will enter 95 in the temperature value field and then press the TAB key. Then use the mouse pointer to select “Fahrenheit” temperature scale and the press the TAB key.  The tester will then press the ENTER key.
{Test Method = I}
 [TCA:PRD:2] [TCA:PRD:5] [TCA:PRD:7] [TCA:PRD:8]

 

The system will convert the Celsius temperature value to Fahrenheit value 35 C in the result fields.

Expected results were observed. 

{Test Pass = T}
{Test Date = 6/29/04}

TCA:VTP:4 The tester will select the “Celsius” temperature scale with the mouse pointer the press the TAB key.
{Test Method = I}
 [TCA:PRD:3]

 

The system will deselect the Celsius radio button and deselect the Fahrenheit radio button.

Expected results were observed. 

{Test Pass = T}
{Test Date = 6/29/04}

TCA:VTP:5 The tester change the display scale on the test computer desktop to 800x600 followed by making the browser full screen.
{Test Method = I}
 [TCA:PRD:9]

 

The page will scale to the proper size with no loss of displayed data.

Expected results were observed. 

{Test Pass = T}
{Test Date = 6/29/04}